HVAC TROUBLESHOOTING: 5 COMMON PROBLEMS YOU CAN SPOT EARLY
When your HVAC starts acting up, it’s time to start investigating. HVAC troubleshooting is a valuable skill for spotting small problems as early as possible.
Maryland’s high humidity and freezing winters mean many opportunities for your HVAC to struggle. We can help you narrow down the next course of action with our in-depth guide on common HVAC and water heater problems.
When in doubt, let a professional technician take a look. Blue Dot provides HVAC repair and maintenance services—as well as HVAC and water heater resources—to help you stay safe and comfortable year-round.
START HERE: 5 QUICK SAFE HVAC CHECKS
Is your HVAC struggling to heat or cool your home? These safety checks will help you narrow down the cause. You may even be able to fix a few common HVAC problems with some simple tweaks.
1. THERMOSTAT MODE
Sometimes you accidentally set the thermostat to the wrong mode. Double-check that you have the right settings for heating and cooling. You may have to turn the setting off and then back on to get it to work.
2. CIRCUIT BREAKER
Did you recently have a maintenance appointment? Your technicians might have forgotten to turn the circuit breaker back on. Take a look at your breaker and see if your HVAC switch is off.
If it is, you can reset the circuit breaker by making sure it’s fully turned off, and then switching it back on. Wait for a few minutes before testing your HVAC to see if it’s working.
3. OPEN VENTS
Another commonly overlooked problem is closed vents, which you can simply flip back open to fix your HVAC. We also recommend giving them a good cleaning to make sure you’re not blowing dust and cobwebs into the air.
4. SYSTEM STATUS
HVAC troubleshooting can involve pressing a few buttons on your control panel to check for any errors. Newer models are usually quite clear if there’s a problem. For example, they may alert you to a thermostat connection problem or low refrigerant levels.
However, don’t attempt to pull apart the control panel or open up your system. Only a trained professional should handle any of your HVAC system’s internal parts.
5. OLD FILTERS
Last, but not least, any air conditioning and heating system check should include inspecting your filters. If your filters are visibly brown or grey, they’re clogged with contaminants like dust, dirt, mold, dander, and pollen.
We recommend changing filters every three months to help keep your HVAC functioning properly.
HVAC TROUBLESHOOTING BY SYMPTOM
While you can fix a few problems like old filters or the wrong thermostat setting, most HVAC problems need professional help. If you need a quick reference for what your HVAC is struggling with, we can help you narrow down the cause.
Symptom | Likely System | First Check | Let Pros Check |
|---|---|---|---|
No heat | Furnace |
|
|
No cooling | AC |
|
|
Odd noises | HVAC or ductwork |
|
|
Breaker tripping | HVAC |
|
|
Weak airflow | HVAC or ductwork |
|
|
Wet leaks | AC |
|
|
NO HEATING
If you can’t fix minor HVAC issues by checking your thermostat or filters, you need a technician. An HVAC that isn’t heating (or barely heating at all) likely has electrical problems, a blocked burner, or a failed pilot light.
NO COOLING
Your HVAC should blow fresh, cold air at the press of a button. If you’re getting a weak trickle or no cooling at all, you may have low refrigerant or failed electrical wiring.
ODD NOISES
HVACs sometimes lightly hum or rumble when they’re working. If you hear rattling, grinding, screeching, or whining, internal parts may have broken or come loose.
BREAKER TRIPPING
Does your breaker trip or do your lights flicker when you use your HVAC? Your system may have a failing capacitor or wiring problems causing an electrical overload.
WEAK AIRFLOW
If you get weak airflow that doesn’t comfortably heat or cool your home, you may have some combination of dirty air filters and low refrigerant. The system may also have clogged condenser and evaporator coils.
LEAKS
You should never see any wet spots or dripping around your HVAC unit. While these leaks can sometimes be harmless condensation (which still needs a professional inspection), you may also have a refrigerant leak. This chemical is flammable and highly hazardous, so you should always have a professional take a look right away.
5 COMMON AIR CONDITIONER PROBLEMS
If you only have an air conditioning unit, you can still deal with issues like warm air or poor air quality. AC troubleshooting is similar to HVAC troubleshooting and usually involves airflow and energy-usage problems.
Check out our air conditioning resource hub, then see if these issues match your situation.
1. WARM AIR
Warm air is usually a sign of low refrigerant. However, you may also have dirty condenser and evaporator coils. Have a technician diagnose the issue.
2. SHORT CYCLING
Does your AC turn off too frequently? It might be inappropriately sized for your home, be struggling with a failing capacitor, or have a dying thermostat.
3. MUSTY ODORS
Humid Maryland summers make it hard to keep mold growth at bay. An AC that smells like mildew or dust likely has dirty filters or coils that need maintenance.
4. WORSENING AIR QUALITY
If your indoor air results in watery eyes or a runny nose, your system likely has dirty filters. Your home may also need an inspection for a potential mold problem.
5. HIGH ENERGY BILLS
Have you compared past cooling bills and noticed they’re unusually high? You may have an older system that needs to be replaced or a hidden electrical problem that needs inspection.
5 COMMON FURNACE AND HEATING PROBLEMS
More concerned about your furnace? HVAC troubleshooting can overlap with common furnace problems like uneven heating or short cycling.
Check out our heating resources, then see if any of these issues match your situation.
1. NO HEAT
If you’re not getting any heat, you may have a failed pilot light or a malfunctioning thermostat. Keep your system off until you can schedule a maintenance appointment with a professional.
2. UNEVEN HEATING
Do you sometimes get heat for the first few minutes, then little to no heating later? Uneven heating can mean airflow problems, ductwork issues, or clogged filters.
3. UNUSUAL ODORS
A little mustiness usually just means you need to change filters or wipe down your vents. If you smell rotten eggs, chemical smells, or burning, that’s a sign of more serious problems. Turn off your system and schedule emergency service.
4. STRANGE NOISES
Do you hear buzzing or rattling when you turn on your system? You may have a failed capacitor or a loose internal part.
5. SHORT CYCLING
Your furnace shouldn’t constantly turn off when you need heat. As with a cooling system, short cycling in a furnace usually stems from improper sizing or a thermostat issue.
WATER HEATER TROUBLESHOOTING
Are you experiencing water heater problems, such as no hot water or leaks? While you can diagnose common problems yourself, most water heater issues require a professional fix.
1. NO HOT WATER
If you’re no longer getting hot water, you may have too much sediment buildup in your tank or an extinguished pilot light. This issue is more likely with an old system that needs to be replaced.
2. FLUCTUATING HOT WATER
Uneven heating from your water heater is a common issue that can stem from sediment buildup or thermostat issues. However, sometimes this problem is minor and stems from increased household activity.
3. LEAKS
Do you see dripping or wet spots around your tank? All leaks need immediate attention to reduce the risk of a burst valve or a flood.
IS IT AN HVAC EMERGENCY?
HVAC emergencies include foul odors, loud noises, no heating, no cooling, and leaks. Minor HVAC problems can be delayed until you schedule an appointment, such as musty odors, short cycling, or weak airflow.
If your HVAC troubleshooting fits any of the following descriptions, get emergency HVAC service:
No heat or cooling during extreme temperatures
Leaking or wet spots around your HVAC
Foul odors like rotten eggs, chemicals, or burning
Damaged wiring or sparking
Loud noises like banging, grinding, or screeching
If you suspect a gas leak or other life-threatening issue, evacuate and call 911 immediately.
REPAIR OR REPLACE YOUR HVAC?
Learning how to troubleshoot an HVAC system also means learning when to repair or replace.
You should repair your HVAC if:
Your model is only a few years old
You rarely call for repairs
You keep up with yearly maintenance
You should replace your HVAC if:
You need multiple repairs per year
Your system is over 10 years old
You constantly have weak airflow or high energy bills
WHEN SHOULD YOU CALL AN HVAC PROFESSIONAL?
You should always call an HVAC professional when you’re dealing with hazardous symptoms like leaks, foul odors, or physical damage. Even a little bit of doubt is a good reason to contact a technician, just to be on the safe side.
HOW BLUE DOT CAN HELP MAINTAIN YOUR HVAC
Once you’re finished with HVAC troubleshooting, let Blue Dot lend a hand. We provide Maryland homeowners with access to expert repair, maintenance, and installation for all kinds of HVAC issues. Enjoy great deals and priority service with our Pro Service Plan.
Fix your HVAC with the help of an experienced local team. Schedule your service today!